AT&T DECT EL52419 - Manual (Page 40)

Caller ID
35
Caller ID history
Dial a call log entry
1. When in the call log, press TCID or DIRS to browse.
2. Press PHONE/
FLASH
or SPEAKER to dial the entry.
Delete entries
• Press
MUTE
/DELETE to delete the shown entry from the caller ID history.
• Follow the steps below to delete all caller ID entries.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use TCID or DIRS to scroll to >CALL LOG, then press
MENU
/SELECT.
3. Use TCID or DIRS to scroll to >DEL ALL CALLS, then press
MENU
/SELECT.
4. When the screen shows DELETE ALL CALLS? press
MENU
/SELECT to
clear the caller ID history of all entries, or press
OFF
/CLEAR to exit
and leave all entries in the caller ID history intact.
Save a call log entry to the directory
1. When in the call log, press TCID or DIRS to browse.
2. Press
MENU
/SELECT to select an entry. The screen displays EDIT NUMBER.
3. Use the dialing keys to edit the number.
• Press
MUTE
/DELETE to backspace and erase a digit.
• Press and hold
MUTE
/DELETE to erase the entire entry.
• Press TCID to move the cursor to the left or to move the cursor to the left or DIRS to the right.
• Press and hold
REDIAL
/PAUSE to insert a dialing pause (p appears).
• Copy a number from the redial list by pressing REDIAL/
PAUSE
and then
TCID or DIRS, or by pressing REDIAL/
PAUSE
to select a number. Press
MENU
/SELECT to copy the number.
4. Press
MENU
/SELECT to move to the name. The screen displays EDIT NAME.
• Use the dial pad keys to add characters (page 28).
• Press
MUTE
/DELETE to erase characters.
• Press and hold
MUTE
/DELETE to erase all characters.
• Press TCID or DIRS to move the cursor to the left and right.
• Press # to insert a space.
5. Press
MENU
/SELECT when done and the handset shows SAVED.
• If the entry is already saved in the directory, the handset shows
ALREADY SAVED. If there is no caller ID information, the handset shows
UNABLE TO SAVE.
NOTES:
1. You may need to change how a caller ID number is dialed if the entry does not appear in the
correct format. Caller ID numbers may appear with an area code that may not be required for
local calls, or without a 1 that may be needed for long distance calls (see page 34).
2. If neither the name nor number is provided, UNABLE TO SAVE appears.