AEG LAVAMAT L 1045 E - Manual (Page 42)

Permanent connection
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This operation must be performed by a qualified electrician.
Important: The power supply cable must be easily accessible after
installing the machine.
42
Installation
132996650.qxd 26/09/01 14.30 Pagina 42 (Nero/Process Black pellicola)