Sony KDL-32W650A - Manual (Page 22)

D:\SONY TV\SY130205_H14 (Rev-1)\4462084121_US\US03STU.fm
KDL-42W650A / 32W650A
4-462-084- 12 (1)
22
3
Press V / v / B / b to select an item, then
press .
Follow the instructions on the screen.
~
• Home mode sets the TV to settings
optimized for home viewing (this setting
is ENERGY STAR compliant).
4
Scan for available channels. If you
receive channels from a cable box or
satellite receiver and do not wish to use
the TV’s built-in tuner, select
Skip .
5
Set up the Internet settings. If you do not
access the Internet, or to set up later,
select
Skip . After you select Continue or
Start (depending on model) at the
Internet setup confirmation screen,
select
Auto to connect to the network
automatically. Select Custom to connect
manually.
~
• If you use WEP security, select Custom
t Wireless Setup t Scan . Then,
select the network name (SSID) you want
to connect. If you cannot find the
required network name, select
[Manual
Entry] and press to enter network
name.
• To set Network Setup later, press
HOME , then select Settings t Network
t Network Setup .
• Use the optional USB Wireless LAN
Adapter to connect with your wireless
router (or access point) at 5GHz. Insert
USB Wireless LAN Adapter and set
Wi-Fi
Direct to Off . Press HOME , then select
Settings t Network t Wi-Fi Direct t
Off .
Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket out of the box as
packaged. If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand; see
page 11 (Detaching the Table-Top Stand
from the TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
you use the Wall-Mount Bracket designed
for your TV and the installation should be
performed by a Sony dealer or licensed
contractor.
• Follow the instructions provided in this
manual for installing the Wall-Mount
Bracket. Sufficient expertise is required
in installing this TV, especially to
determine the strength of the wall for
withstanding the TV’s weight.
• Be sure to use the screws supplied with
the Wall-Mount Bracket when attaching
the mounting hooks to the TV set.
The supplied screws are designed as
indicated by illustration when measured
from the attaching surface of the
mounting hook.
The diameter and length of the screws
differ depending on the Wall-Mount
Bracket model. Use of screws other than
those supplied may result in internal
damage to the TV set or cause it to fall,
etc.
7 mm
Screw
(supplied with the
Wall-Mount Bracket)
Mounting Hook
Hook attachment on rear of
TV set