Alpine CDA-7876 - Manual (Page 15)

13
-EN
Titling Discs/Stations
It is possible to title your favorite CD's or radio
stations.
1
Press the TITLE button and select the title
display mode.
For details, see Displaying the Title/Text (page
12).
2
Press and hold the TITLE button for at least 3
seconds. The first character will blink.
3
Rotate the Audio Control knob to select the
desired letter/numeral/symbol available for
naming. (“A” for example).
4
Press the Audio Control button to store the first
character. The first character will stop blinking
and the display will automatically advance to the
next character. When that character begins to
blink, you may choose the next letter or symbol
of your title.
5
Repeat the steps 3 and 4 above to complete the
titling. Pressing the Audio Control button after
entering the 8th character, automatically stores
the title into memory.
When entering a title of less than 8 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 6 to complete the title.
6
Press and hold the TITLE button for at least 3
seconds to record the title.
NOTES
• You can enter 24 radio station titles and 18 CD titles
on this unit. If you try to store beyond the limit, the
display will show “FULL DATA.” At this point, no
more titles can be stored.
• The CD Changer title length or memory capacity
varies depending upon the model being used.
• To input a new title, one of the previously inputted
titles must first be deleted.
• When you want to erase a title, enter the “ ” symbol
into all spaces.
• The operations described in steps 3 to 5 must be made
within 10 seconds. The input mode will be cancelled if
no action is taken for over 10 seconds.
• Removing power from the unit may delete these titles.
Use caution when manipulating the power cord.
Searching for Titled Discs/Titled
Stations
If a CD/Station is titled, you can do a search for it.
(To title CDs or stations, refer to “Titling Discs/
Stations” on this page.)
1
When the unit is in radio or CD Changer mode,
press and hold the T.S.M. button for at least 2
seconds. The title blinks in the display.
2
Press the g DN or f UP button to select
the desired disc title from the CD changer, or the
desired station title.
3
Press the T.S.M. button to play the selected disc
or station.
The unit will automatically search for the disc or
station and begin play.
NOTE
This function cannot be performed when using a multi-
changer switching device.
Erasing Disc Title/Station Title
1
Press the TITLE button to select the titling mode.
Then, press and hold for at least 3 seconds.
2
Press and hold the -/J button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
3
Press the g DN or f UP button repeatedly
until the title you want to erase is displayed.
4
Press and hold the -/J button for at least 2
seconds to erase the title displayed.
5
Press and hold the TITLE button for at least 3
seconds to cancel the title erasing mode.
NOTE
You cannot erase CD-TEXT.