beautypg.com

Connecting the system, Secure the jack by tightening the two screws, Connect the speaker cord to the active subwoofer – Sony HT-CT100 User Manual

Page 8

background image

8

US

• Use screws that are suitable for the wall material and

strength. As a plaster board wall is especially fragile,
attach the screws securely to a wall beam. Install the
satellite speaker on a vertical and flat reinforced area
of the wall.

• Be sure to subcontract the installation to Sony dealers

or licensed contractors and pay special attention to
safety during the installation.

• Sony is not responsible for accidents or damage

caused by improper installation, insufficient wall
strength, improper screw installation or natural
calamity, etc.

Connecting the system

Connect the active subwoofer and the satellite
speaker as shown in the illustration below.

Connect the speaker cord to the active
subwoofer.

Secure the jack by tightening the two screws.

Notes

HDMI

SPEAKER

ONLY FOR

SS-MCT100

Rear of the satellite speaker

Speaker cord
(approx. 3 m (10 feet))

Rear of the active subwoofer

IN

IN

HD

MI

DV

D

DV

D IN

SA

T IN

TV O

UT

SPE

AKE

R

ON

LY FO

R

SS

-M

CT10

0