Sony DHC-FL7D - Manual (Page 58)

58 GB
Listening to audio from a
connected component
Listening to the digital audio
from the connected MD deck
or DVD player
1
Connect the digital optical cable.
See “Hooking up optional components” on
page 57.
2
Press DIGITAL (or FUNCTION on the
remote repeatedly until “DIGITAL”
appears).
Start playing the connected component.
Listening to the analog audio
from the connected MD deck
or VCR
1
Connect the audio cords.
See “Hooking up optional components” on
page 57.
2
(For North American model)
To listen to the sound of the
connected VCR:
Press VIDEO (MD) (or FUNCTION on the
remote repeatedly until “VIDEO (MD)”
appears).
Start playing the connected component.
To listen to the sound of the
connected MD deck:
Hold down VIDEO (MD) and press ?/1
while the power is on. Release ?/1 first,
then release VIDEO (MD). This switches
the function from VIDEO to MD. Once you
switched to the MD function, just press
VIDEO (MD).
Start playing the connected component.
E OPTICAL DVD DIGITAL OUT jack
Use a digital optical cable (square, not
supplied) to connect an MD deck to this jack.
You can then output the digital audio to the
MD deck from this system.
F VIDEO (MD) IN jacks
(North American model only)
MD (VIDEO) IN jacks
(other models)
Use audio cords (not supplied) to connect an
MD deck or VCR to these jacks. You can then
listen to analog audio from the MD deck or
VCR through this system.
G VIDEO (MD) OUT jack
(North American model only)
MD (VIDEO) OUT jacks
(other models)
Use audio cords (not supplied) to connect an
MD deck or VCR to these jacks. You can then
output audio to the MD deck or VCR from this
system.
Tip
When you remove the optical cover, keep it for future
use.
Hooking up optional components
(continued)