Sony VGP-MR100U User Manual
Page 22
VGP-MR100QSG(GB)_2-580-488-11(1)
22
Case 3: Network connector of computer is free (system environments E, F)
Note
When connecting the Network Media Receiver and the computer as shown above, the following settings
must be configured:
• Assign a fixed IP address to the computer (this page).
• Select an IP address allocation method for the Network Media Receiver (page 28).
Assigning a fixed IP address to the computer
When the Network Media Receiver is connected via a network cable in one of the system
environments listed below, a fixed IP address must be assigned to the computer.
• E, F (page 19)
• G (page 19) without router with built-in hub
Note
Do not use this system configuration if the system environment includes a router (or a router with built-in
hub).
1
On the computer, click “Start” on the Windows taskbar, and click “My
Computer” to display the “My Computer” window.
2
Click “More” and “My Network Places”.
The “My Network Places” window appears.
3
Click “Show Network Connections”.
The “Network Connections” window appears.
4
Right-click “Local Area Connection”, and click “Properties”.
The “Local Area Connection Properties” window appears.
To NETWORK
connector
Computer
To NETWORK
connector
Network Media Receiver
Crossover
cable (supplied)
Connection adapter
(supplied)