beautypg.com

Other methods of setting the ip address, Set the ip address with arp/ping – Axis Communications 209FD/FD-R User Manual

Page 13

background image

AXIS 209FD/AXIS 209FD-R Installation Guide

Page 13

ENGLISH ENGLISH

Other methods of setting the IP address

The table below shows the other methods available for setting or discovering the IP address.
All methods are enabled by default, and all can be disabled.

Set the IP address with ARP/Ping

1. Acquire an IP address on the same network segment your computer is connected to.
2. Locate the serial number (S/N) on the AXIS 209FD label.
3. Open a command prompt on your computer and enter the following commands:

4. Check that the network cable is connected to the camera and then start/restart the

camera, by disconnecting and reconnecting power.

5. Close the command prompt when you see ‘Reply from 192.168.0.125: ...’ or similar.
6. In your browser, type in http:// in the Location/Address field and press Enter

on your keyboard.

Notes:

• To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK.
• To use the ARP command on a Mac OS X, use the Terminal utility in Application > Utilities.

Use in operating
system

Notes

UPnP™

Windows

When enabled on your computer, the camera is automatically
detected and added to “My Network Places.”

Bonjour

MAC OSX
(10.4 or later)

Applicable to browsers with support for Bonjour. Navigate to the
Bonjour bookmark in your browser (e.g. Safari) and click on the
link to access the camera’s web pages.

AXIS Dynamic DNS
Service

All

A free service from Axis that allows you to quickly and simply
install your camera. Requires an Internet connection with no
HTTP proxy. See www.axiscam.net for more information.

ARP/Ping

All

See below. The command must be issued within 2 minutes of
connecting power to the camera.

View DHCP server
admin pages

All

To view the admin pages for the network DHCP server, see the
server’s own documentation.

Windows syntax

Windows example

arp -s
ping -l 408 -t

arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125

UNIX/Linux/Mac syntax

UNIX/Linux/Mac example

arp -s temp
ping -s 408

arp -s 192.168.0.125 00:40:8c:18:10:00
temp
ping -s 408 192.168.0.125