Sony KDL-40W3000 - Manual (Page 7)

7
(GB)
Step 3:
Installing the Base
Bracket on the wall
1
Secure the Base Bracket to the
wall using four or more 8 mm
(
11 / 32 inches) diameter or
equivalent screws (not supplied).
1 Determine the screw holes (d, h) for attaching the
Mounting Hook to the Base Bracket. Then attach
them securely using the supplied screws (+BVST4
× 12).
d
g
h
Screw (+BVST4 × 12)
Base Bracket
Mounting Hook
2 Secure the Base Bracket and the Mounting Hook on
the wall using the four or more 8 mm (
11 / 32 inches)
diameter or equivalent screws (not supplied).
Select four screw holes with the z mark shown in
the diagram below and tighten the screws securely
so that they will not become loose.
3 Remove the screws which were attached in
procedure 1 and detach the Mounting Hook from
the Base Bracket.
CAUTION
Be careful not to drop the Mounting Hook when removing
the screws from the Mounting Hook.
WARNING
• The screws required for this procedure are not
supplied. Select screws suitable for the material and
structure of the wall.
• If the Base Bracket cannot be attached securely
enough, use additional screws.
• Be sure to confirm that the Base Bracket is securely
attached to the wall.
Align the unit so that it is level.
Base Bracket