Sony SDM-P234 - Manual (Page 25)

25
GB
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size: 23 inch (58.4 cm)
Input signal format
RGB operating frequency*
Horizontal: 28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:48–85 Hz (analog RGB)
60 Hz (digital RGB)
Resolution
Horizontal: Max.1920 dots (Only when the vertical
frequency is set to 60 Hz, the horizontal resolution is 1600
dots or more.)
Vertical: Max.1200 lines (Only when the vertical frequency
is set to 60 Hz, the vertical resolution is fixed to 1200 lines.)
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75
Ω
, positive
SYNC signal:
TTL level, 2.2 k
Ω
, positive or negative (Separate
horizontal and vertical, or composite sync)
0.3 Vp-p, 75
Ω
, negative (Sync on green)
Digital RGB (DVI) signal: TMDS (Single link)
Audio input
Stereo minijack, 0.5 Vrms
Audio output
Stereo minijack
Power requirements
100–240 V, 50–60 Hz, Max. 1.0 A
Power consumption
Max. 80 W
Operating temperature
5–35 ° C
Dimensions (width/height/depth)
Display (upright):
Approx. 534
Ч
429
Ч
250 mm (with stand)
(21
1
/ 8
Ч
17
Ч
9
7
/ 8 inches)
Approx. 534
Ч
352
Ч
110.5 mm (without stand)
(21
1
/ 8
Ч
13
7
/ 8
Ч
4 inches)
Mass
Approx. 9.7 kg (21 lb 6 oz) (with stand)
Approx. 7.5 kg (16 lb 9 oz) (without stand)
Plug & Play
DDC2B
Accessories
See page 7.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.