Sony KDE-42XS955 - Manual (Page 10)

10
(US)
Check the operation of
the woofer speaker
Check the operation of the
woofer speaker.
This Floating Stand is equipped with a woofer
speaker. Turn on the power switch of the TV
after installing the Mounting Rack (with the TV)
onto the Plate Unit and check if the woofer
speaker is operating properly. If the TV is not
installed on the Mounting Rack properly, no
sound will be heard from the woofer speaker, or
an error message will appear on the TV screen
after a while.
2 Run the cables equally through the openings
at the top of the right and left pillars.
3 Place all cable covers back in their positions.
1
2
Put the cables for the external
equipment installed on the glass
shelf into the rail as shown
below.
Glass shelf
Cables
Rail
Align the outside of the cable
cover with the groove of the
pillar, and then give the cable
cover a slight press toward the
glass shelf to fit it in position.
Note
The distance between the TV and the wall may
affect how the bass sounds from the speaker. If you
need to adjust the sound quality (bass frequencies)
after installation, change the distance between the
stand and the wall or adjust the woofer level
setting from the TV's menu option. See the
instruction manual of the TV for more details on
adjusting the sound quality.