Sony KDL-55HX750 - Manual (Page 149)

i-Manual
Print Font Size
Top Page > Configuring Various Settings > Selecting the cable/antenna signal
Selecting the cable/antenna signal
Steps
1. Press the HOME button, then select [Settings] at the bottom of the screen using the /
buttons.
2. Select [Channels & Inputs]/[Channels, Inputs & Ginga] using the / buttons, then press
the button.
3. Select [Cable/Antenna] using the / buttons, then press the button.
4. Select [Cable] or [Antenna] using the / buttons to set the received signal, then press the
button.
To return to the last viewed source, press the HOME button twice.
Tips
After changing this setting, it is recommended to run [Auto Program].
© 2012 Sony Corporation
Top of Page
149