Kantech KT-400 User Manual
Kt-400
Table of contents
Document Outline
- Table of Contents
- Pre-Installation Information 1
- Technical Support 2
- Compliance Specifications 3
- FCC & IC Compliance 3
- UL Compliance 3
- UL 294 Compliance Notice 3
- UL 1076 Compliance Notice 3
- Overview 5
- System Architecture 11
- VITAL LED Heartbeat Patterns 14
- Technical Specifications 15
- Electrical Specifications 16
- KT-400 Ethernet Four-Door Controller Models, Expansion Modules Models 16
- Models Information 18
- Installing the KT-400 Ethernet Four-Door Controller 19
- Connecting the KT-400 Ethernet Four-Door Controller 22
- Powering the KT-400 Ethernet Four-Door Controller 23
- SPI Expansion Port 24
- Important Installation Rules about Expansion Modules 25
- Troubleshooting 29
- Default initialization 30
- KT-400 Ethernet Four-Door Controller Maintenance Recommendations 31
- Configuring the KT-400 Ethernet Four-Door Controller with the Web Configuration Page 32
- Configuring the KT-400 Ethernet Four-Door Controller with the KT-Finder 33
- Installation Checklist 37
- Inputs and Outputs Assignments Sheet 38
- Pre-Installation Information
- Copyright Information
- Safety Instructions
- Technical Support
- Compliance Specifications
- FCC & IC Compliance
- UL Compliance
- UL 294 Compliance Notice
- UL 1076 Compliance Notice
- Overview
- System Architecture
- VITAL LED Heartbeat Patterns
- Technical Specifications
- Electrical Specifications
- KT-400 Ethernet Four-Door Controller Models, Expansion Modules Models, Related Documentation and Miscellaneous Items
- Models Information
- Installing the KT-400 Ethernet Four-Door Controller
- Preparing to Install the KT-400 Ethernet Four-Door Controller
- Physical Installation
- Earth Grounding
- Door Locking Devices
- Hooking Up Inputs
- Connect readers and keypads
- Relay Controlled Outputs
- Auxiliary Outputs
- Tamper Protection
- Connecting the KT-400 Ethernet Four-Door Controller
- Connecting the VC-485 or the USB-485 to the RS-485 Bus
- Connecting over Corporate Network (LAN)
- Powering the KT-400 Ethernet Four-Door Controller
- SPI Expansion Port
- Important Installation Rules about Expansion Modules
- Troubleshooting
- Default initialization
- How to reset the KT-400 Ethernet Four-Door Controller for Factory Default DHCP mode
- KT-400 Ethernet Four-Door Controller Maintenance Recommendations
- Configuring the KT-400 Ethernet Four-Door Controller with the Web Configuration Page
- Optional Documentation
- Configuring the KT-400 Ethernet Four-Door Controller with the KT-Finder
- Installation Checklist
- Inputs and Outputs Assignments Sheet