Asus INTEL 810 MICROATX MOTHERBOARD CUW-RM - Manual (Page 18)

18 ASUS CUW-RM User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
1) JumperFree™ Mode Setting (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
NOTE: Set all dip switches (DSW) to OFF for JumperFree™ mode.
Setting JEN
Disable (Jumper) [1-2] (default)
Enable (JumperFree) [2-3]
®
CUW-RM
CUW-RM JumperFree™ Mode Setting
DSW
OFF
ON
1 2 3 4 5
JEN
1 2 3
Jumper
Mode
JumperFree
Mode
1 2 3
2) I/O Voltage Setting (VIO)
This jumper allows you to select the voltage supplied to the DRAM, chipset,
PCI, and the CPU’s I/O buffer. The default voltage should be used unless pro-
cessor overclocking requires a higher voltage.
Setting VIO
Normal [1-2] (default)
3.66V [2-3]
®
CUW-RM
CUW-RM I/O Voltage Setting
Normal
(Default)
VIO
3.66 Volt
1 2 3 1 2 3
WARNING! Using a higher voltage may help when overclocking but may result
in the shortening of your computer component’s life. It is strongly recommended
that you leave this setting on its default.