Adaptec ANA-62000 - Manual (Page 159)

12-3
Installing Duralink64 NetWare Client
Selecting Options
This section provides the option you must choose in a given screen.
These screens vary depending on which NetWare Client32 package
you are using.
Screen
Name/Message
Option
Client Installation Choose either NetWare Client32 for DOS and
Windows 3.1x
or IntranetWare
DOS/Windows for DOS/Windows .
Driver Type Choose 32-Bit.
32-Bit Network Board
Drivers Choose User Specified 32 Bit Driver. Do not
choose Adaptec PCI Ethernet Driver Failover!
When asked to insert
the NetWare Client32
for DOS/Windows
3.1x
32-bit disk Insert the Duralan Driver for NetWare 4. X
(disk 2 of 2), and then type a:\nwserver.
32-Bit Network Board
Drivers Choose Adaptec DuraLAN Network
Adapters
.
Settings for Adaptec
DuraLAN Network
Adapter Set IOMAP to 1.
Set Connection Type to Autodetect Default or
None
.