Asus LCD MONITOR VG278 Series - Manual (Page 17)

3-4 ASUS VG278HE Series LCD Monitor
• Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100.
• Trace Free: Speed up the response time. The adjusting range is
from 0 to 100.
• Aspect Control: Adjust the aspect ratio to “4:3”, “Full”, or
“ OverScan”. (The “OverScan” ratio is only available for HDMI
input.)
• ASCR: Turn on or off the ASCR (ASUS Smart Contrast Ratio)
function. (Only available at Scenery Mode, Theater Mode,
Game Mode, and Night View Mode.)
• Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100. (Only available for VGA input.)
• Focus: Reduce Horizontal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100. (Only available for VGA input.)
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
4. Input Select
Select the input source from “ VGA”, “DVI”, or “HDMI”.
VG278
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
VGA
DVI
HDMI
Only the VGA and DVI input supports the “Auto scan” function.