Sony KE-32TS2E - Manual (Page 18)

18
Menu System
Adjust Pixel The “Adjust Pixel” option allows you to adjust the picture from an
RGB piece of equipment.
To do this:
1
After selecting the option, press .
2 Press or to select the following option.
Auto Adjust:
Select OK to automatically make the best picture for the input
signal. Note that it may not be adjusted perfectly depending
on the input signal condition or picture pattern. In this case,
perform Auto Adjust again.
Dot phase:
Adjust between 00-63 when part of a displayed text or image
is not clear.
Total H Pixel (Total Horizontal Pixel):
Adjust when the whole picture is not clear as a whole.
Reset:
Reset to the factory settings.
Adjust Pixel is only available for the RGB input signal connected to 5
connector and the “AV5 Input”option is set to “RGB” in the “Features” menu.
Reset Cancel / OK
Select OK to reset “Screen Zoom”, “Screen Size” and “Screen Shift”
options to the factory preset