AeroGarden Deluxe 100733-WHT - Manual (Page 12)

trellis Coil
lamp Hood
Bracket
1 Clip Trellis Coil on Bracket.
Use trellis system
(optional)
As your plants begin to produce fruit, you may find
they are starting to tip over or even break due to the
additional weight on branches.
When this occurs, support plants and bring them
back to the upright position by using your Trellis
System*.
*trellis Brackets must be attached to the lamp Hood in
order to use the trellis system (see Bracket attachment
instructions on page 2, step 1C).
2 Pull down Trellis Coil.
4 Gently push up on supported branch
until it is at desired height.
3 Wrap Strap around branch that
needs support and snap closed.
trellis Coil
11
as a safety precaution, unplug aerogarden furnishing before performing this task. Be sure Grow Bulbs are cool to the touch
before attaching or adjusting Trellis Coil.