Argus Camera Argus DC-5195 - Manual (Page 14)

14
Frequenty Asked Question
The camera does not turn ON:
The battery is not properly installed. Remove
and reinstall the batteries.
Insufficient battery voltage. Do not use old
batteries or batteries with mixed battery life.
The camera does not take pictures:
The memory full - Delete unwanted files
The battery level is low - Change the battery
The image edge is blurry / too dark:
The camera was moved when taking photos.
Hold the camera steady with both hands. Use
the first finger of your right hand to press the
shutter. Stand on solid ground. Do not move or
run when pressing the shutter. Even tiny
movements will result in fuzzy photos.
The computer does not recognize camera:
The camera driver has to be installed before
picture download.
Ensure that camera is connected the rear USB
port of the computer.
Check in Device Manager, under Imaging
Devices and see if the computer is recognizing
the camera.
How do I contact technical support?
Argus Technical Support:
(888) 552 - 7487
[email protected]
www.arguscamera.com