Audiovox Commander MT XMRVRFM002 - Manual (Page 48)

48
Auto-On
The XM Mini-Tuner is configured to shut down when the vehicle
is shut off, or power is disconnected. By default, when the power to
the unit is reapplied, the user must press the power button on the
Disiplay Controller to turn the unit back on. This feature allows the
user to program the receiver to automatically turn on when power
to the unit is reapplied (much like a vehicle radio).
When in the Auto-On menu, use the scroll wheel or the remote
control up/down buttons to highlight the On or Off option. (See
Figure 59.) When the desired setting is highlighted, press the Se-
lect button to enter your selection. Acceptance is confirmed by an
audio beep and the confirmation screen shown in Figure 60.
Figure 59. Select Auto-On Mode Display Screen
Figure 60. Auto-On Confirmation Display
Menu Options/Auto On
Off
ROTATE DIAL TO CHANGE
On
Auto-On is On
AUTO-ON MODE