Removing the installed memory card – Apple iBook G4 (Memory Card Replacement) User Manual

Page 4

iBook G4 Memory Card -

10. Touch a metal surface on the inside of the computer to discharge any static electricity,

as shown.

(Figure 5)

Important:

To avoid electrostatic discharge damage, always ground yourself by

touching the computer’s framework before you touch any parts or install any

components inside the computer. To avoid static electricity building back up in your

body, do not walk around the room until you have completed the installation and

closed the computer.

Figure 5

Removing the Installed Memory Card

If your computer has the optional AirPort Extreme Card installed, unlatch the flexible

wire holder that secures the card.

(Figure 6)

Use the clear, plastic pull-tab on the card to remove the card from the slot. (You do not

need to disconnect the antenna.)

Note:

To avoid scratching the computer’s case, place a soft cloth between the

AirPort Extreme Card and the surface of your iBook.

Figure 6