Ariens Walk Behind Lawn Mower 911164 - LM21SW - Manual (Page 11)

GB - 11
Swivel Wheel Models (911134, 164,
165)
To change front wheel cutting height, insert
height adjuster pin into the holes that match
the desired cutting height and fasten with key
ring (Figure 6).
To change rear wheel cutting height, move
cutting height levers one notch at a time to
set the desired cutting height.
OPTIONAL CONTROLS
Primer Bulb
Push the primer bulb in to add fuel for easier
engine start.
Speed Control (self-propelled
models)
Speed control rod changes the mower’s
forward travel speeds.
High
High Low
Figure 5
1. Cutting Height Lever
1
1
OM0165
Front
Rear
Low
Figure 6
1. Cutting Height Lever
2. Height Adjuster Pin
3. Key Ring
1
2
3
Rear
Front
High
Low
OM1270