Aurora Multimedia ICS-SP20 User Manual
Page 9
ICS-SP20 User Manual
8
7.3 General
Settings
This menu allows control of various “general” aspects of ICS-SP20 behavior. Note that the *-marked
options are accessible only in Service mode, and not in Stand-alone mode.
A/V Input
– Allows user to select the audio/video input source (among the built-in Tuner and
available AV-inputs)
Current time – Allows to set the current time
Sleep timer
– Allows user to set the sleep timer
7.4 Video
Settings
Brightness
-- Controls the brightness of the picture.
Contrast
-- Controls the contrast of the picture.
Color
-- Controls color saturation (0 corresponds to grayscale picture)
Startup Logo
-- Enabled or disables “logo” picture display after ICS-SP20 powering on.
Timer Logo
-- Time, in seconds, for which the “logo” picture is shown after ICS-SP20
powering on.
Video Position -- Opens the “Video position” submenu, allowing control of picture position on
screen.