ASA Electronics AOM681 - Manual (Page 7)

7
6. There are 2 options for connecting the LCD monitor to the junction box. If the
application is such that the monitor is in close proximity to the junction box, the
AOM681 monitor can be connected directly to the junction box. If the junction box
is mounted further from the monitor, use the 5’ intermediate cable included with the
AOM681 to connect the monitor to the junction box. If more cable length is needed,
additional 5’ lengths of the intermediate cable can be purchased. (See the accessory
list at the back of this manual for part number details.)
7. Connect the 4-pin power harness to vehicle. (See system connection illustration page
8)
8. Plug camera extension cable (available separately P/N CEC25) into AV1 or AV2
input connector on the junction box. Plug observation camera into camera extension
cable.
9. Make sure all cables are routed away from hot or moving parts, and away from sharp
edges. Secure cables with wire ties.
10. For rear observation applications, range marker stickers have been included with this
product. These markers are designed to adhere to your LCD monitor and provide a
reference for gauging distance. See page 9 for illustration showing proper use and
installation of the range markers