beautypg.com

Error displays/messages, 27 error displays/messages – Sony CDX-F5000C User Manual

Page 27

background image

27

Error displays/Messages

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

The stations cannot be received.
The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the
power supply lead of a car’s aerial booster.
(Only when your car has built-in FM/MW/
LW aerial in the rear/side glass.)

• Check the connection of the car aerial.
• The auto aerial will not go up.

t Check the connection of the power aerial

control lead.

• Check the frequency.
• When the DSO mode is on, the sound is

sometimes hampered by noises.
t Set the DSO mode to “OFF” (page 22).

Automatic tuning is not possible.

• The local seek mode is set to “ON.”

t Set the local seek mode to “OFF”

(page 14).

• The broadcast signal is too weak.

t Perform manual tuning.

The “STEREO” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set the monaural reception mode to

“ON” (page 14).

A programme broadcast in stereo is heard
in monaural.

The unit is in monaural reception mode.
t Cancel monaural reception mode

(page 14).

RDS

The SEEK starts after a few seconds of
listening.

The station is non-TP or has weak signal.
t Press (AF/TA) repeatedly until “AF, TA-

OFF” appears.

No traffic announcements.

• Activate “TA.”
• The station does not broadcast any traffic

announcements despite being TP.
t Tune in another station.

PTY displays “--------.”

• The current station is not an RDS station.
• RDS data has not been received.

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about
5 seconds, and an alarm sound will be heard.

BLANK

*

1

No tracks have been recorded on an MD.*

2

t Play an MD with recorded tracks on it.

ERROR

*

1

• A CD is dirty or inserted upside down.*

2

t Clean or insert the CD correctly.

• A CD/MD cannot play because of some

problem.
t Insert another CD/MD.

FAILURE

The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this

model to check the connection.

HI TEMP

The ambient temperature is more than 50°C.
t Wait until the temperature goes down

below 50°C.

NO DISC

No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.

NO MAG

The disc magazine is not inserted in the CD
unit.
t Insert the magazine in the CD unit.

NO MUSIC

A CD which is not a music file is inserted in
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD

unit.

NOTREADY

The lid of the MD unit is open or the MDs are
not inserted properly.
t Close the lid or insert the MDs properly.

OFFSET

There may be an internal malfunction.
t Check the connection. If the error

indication remains on in the display,
consult your nearest Sony dealer.

RESET

The CD/MD unit cannot be operated because
of some problem.
t Press the RESET button on the unit.

continue to next page

t