Acer X243W - Manual (Page 12)

EN-11
X243W
Standard Timing Table
Mode Resolution
1 VGA 720 x 400 70 Hz
2 VGA 640 x 480 59.94 Hz
3 VESA 640 x 480 75 Hz
4 VESA 800 x 600 60 Hz
5 VESA 800 x 600 75 Hz
6 VESA 1024 x 768 60 Hz
7 VESA 1024 x 768 75 Hz
8 VESA 1280 x 1024 60 Hz
9 VESA 1280 x 1024 75 Hz
10 CVT red 1440 x 900 60 Hz
11 CVT 1440 x 900 60 Hz
12 CVT 1440 x 900 75 Hz
13 CEA 861 1280 x 720 60 Hz
14 CVT red 1284 x 800 60 Hz
15 CVT 1284 x 800 75 Hz
16 VESA 1600 x 1200 60 Hz
17 CVT red 1600 x 1200 60 Hz
18 CVT 1680 x 1050 60 Hz
19 CVT red 1680 x 1050 60 Hz
20 CVT red 1920 x 1200 60 Hz
21 CVT 1920 x 1200 60 Hz
To reduce the need for adjustment for different modes, the monitor has
default setting modes that are most commonly used as given in the table
below. For optimum adjustment, the user is suggested to perform the
Auto Setup under Windows “Full Screen“ pattern or using the pattern in
the floppy disk provided. When none of the mode is matched, the user can
store their preferred modes in the user modes. The monitor is capable of
storing up to 9 user modes. The only condition to store as a user mode is
the new display information must have 1 KHz difference for horizontal
frequency or 1 Hz for vertical frequency or the sync signal polarities are
different from the default modes.