Password protection allows you restrict access to the system only to authorised
personnel. A password first needs to be set and then, using the keyboard
attached to the remote X100 module, a simple key sequence allows the system
to be quickly and securely detached from its peripherals.

To set a password

1 Simultaneously, press the hotkeys (by default,

and

) along with

to enter configuration mode.

2 Press followed by

3 Now enter your new password, within the following constraints:

• Passwords are NOT case sensitive,
• Passwords may be any length from one character to a maximum of forty

characters,

• The following keys may NOT be used:

, or

4 When you have entered the password, press

to signal its completion.

5 Press

once more to exit configuration mode.

For full details about how to lock and unlock the system using your password,
please see the

Locking.and.unlocking.the.system

section in the ‘Installation

and operation’ chapter.