Sony XVM-F65 - Manual (Page 10)

10
`/1
V/v
INPUT
MODE MENU INPUT
ATT `/1
VOL
VOLUME
＋/−
POWER INPUT
When NTSC Video is selected
VIDEO1
NTSC
When PAL Video is selected
VIDEO1
PAL
Operation
Selecting the input source
You can select the input source and colour system.
1
Press (POWER).
On the card remote commander, press
{/1
.
The power is turned on.
2
Press (INPUT) to select the desired input source.
Each time you press (INPUT), the indication changes in the following sequence:
To select the connected navigation system
Press (INPUT) repeatedly to select “NAVI”.
3
Press M or m ((VOLUME) (+) or (–) on the monitor) to select PAL or NTSC
system.
Press either button while the source indication (such as “VIDEO 1”) is displayed.
VIDEO 1 VIDEO 2 NAVI