AEG MCC 663 - Manual (Page 27)

27
Before programming, check that the clock is set to the
correct time.
Example : 12:00
To set:
Proceed as if setting the desired programme for imme-
diate use :
select your function and programme length (e.g. con-
vection 45 minutes at 200° C).
Instead of START, press the PRESET PROGRAMME
button
. The programme length is automatically
added to the clocktime (12:00) and this hour appears
in the display, together with the preset programme
symbol
and the selected function.
With the selector knob, set the hour at which you wish
the programme to FINISH, e.g. you would like the dish
to be ready at 20:00.
Set the time within 10 seconds, or the programme will
start up.
Press the START button
again to validate the time.
The preset programme symbol and the clocktime are
displayed.
In order to verify, you may press the PRESET
PROGRAMME button to display settings. Press
CANCEL to display the clocktime.
To cancel the preset programme, press the CANCEL
button for 5 seconds.
You may preset all programmes with the exception of
defrosting.
A minimum programme length of 1 minute is required.
Preset programmes
☞
4 5 : 0 0
2 0 0
1 2 : 4 5
2 0 0
2 0 : 0 0
2 0 0 ☞
i