Karcher B 40 W DOSE disc - Manual

QUICKSTART
5.964-243.0 04/12
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.
Start up
1 A B A Unplug the charger from the mains.
B Wind the mains cable around the cable
holders.
2 A B A Open the lock of the fresh water reservoir.
Fill fresh water (maximum 60 °C) until the
lower edge of the filling nozzle.
Close the lock of the fresh water reservoir.
or
B
Connect the hose to the automatic filling
system and open the water supply
(max. 60 °C, max. 5 bars).
Monitor the appliance - the automatic filling
system will interrupt the water supply when
the tank is full.
Shut off the water supply and disconnect the
hose from the appliance.
3 A Model with dosing equipment "Dose"
A Place the detergent bottle into the holder.
Close the bottle lid.
Insert the suction hose of the dosaging
equipment into the bottle.
Model without dosing equipment
"Dose"
A Add the detergent to the fresh water
reservoir.
Operation
1 A B Starting the machine
A Turn the program selection switch to "OFF".
B Plug in the Intelligent Key.
2 A B Driving
Turn the programme selector switch to position 1
"Transport mode".
Drive forward
A
Press the driving lever to the front.
Stop the machine: Release driving lever.
Reverse drive
B
Press the driving lever to the rear.
Stop the machine: Release driving lever.
B 40 W