Karcher Scrubber BRS 40-1000 C - Manual (Page 6)

6 English
Recommended detergents:
Î Open the cover of the fresh water
reservoir.
Î Pour in water/detergent mixture.
Maximum temperature of the liquid
50°C
Î Close the cover of the fresh water
reservoir.
Î Place the push handle vertically and
arrest.
Î Insert the transport wheel axles into
the borings on the appliance and
lock them.
Î Tilt the appliance to the side and
drive it to the place of use on its
transport wheels.
At the site of use:
Î Press the transport wheel release
button and pull the transport wheel
out.
Î Insert the transport wheels into their
holder until they stop.
ƽ Danger
Check the mains cables of the machine
each time before using the machine to
see that it is not damaged. Never op-
erate a machine with damaged cables.
Get the damaged cables replaced by
an electrician.
Î Insert the looped end of the exten-
sion cable in the strain relief hook.
Î Plug in the mains plug.
Î Place the push handle vertically and
arrest.
Î Push the push handle down and
turn it to the position indicated
above.
Î Start up the appliance (see "Clean-
ing") and move it forward and back-
wards over the surface to be
processed.
Î Place the push handle vertically and
arrest.
Î Push the push handle down and
turn it to the position indicated
above.
Î Start the appliance up (see "Clea-
ing".
Î Move the appliance to the left:
Press the left side of the push han-
dle down.
Move the appliance to the right::
Press the rlght side of the push han-
dle down.
Î Slide the lock of the push handle up
and swivel it to a comfortable work-
ing height.
Î Turn on the brushes by using the
switch for the brush drive.
Î Turn on the brush irrigation by using
the switch for the detergent solu-
tion.
Î Move the appliance over the sur-
face to be processed by the push
handle (see "Cleaning method").
ṇ Warning!
Risk of damage to the floor covering.
Do not operate the appliance on the
spot.
Î Slide the lock of the push handle up
and swivel it to a comfortable work-
ing height.
Î Turn on the brushes by using the
switch for the brush drive.
Î Move the appliance over the sur-
face to be processed by the push
handle (see "Cleaning method").
ṇ Warning!
Risk of damage to the floor covering.
Do not operate the appliance on the
spot.
Note
To polish underneath furniture, the
fresh water reservoir can be removed.
Î Release the switch for detergent so-
lution.
Î Release the brush drive button.
Î Place the push handle vertically and
arrest.
Î Disconnect the mains plug.
Î Lift up the fresh water reservoir and
carry it to the disposal site.
ṇ Warning
Please observe the local provisions re-
garding the wastewater treatment.
Î Remove the cover of the fresh wa-
ter reservoir and pour out the liquid
via the notch.
Application Detergent
Routine cleaning of all
water resistant floors RM 746
RM 780
Routine cleaning of
glossy surfaces (e.g.
granite) RM 755 es
Routine cleaning and
basic cleaning of indus-
trial floors RM 69
ASF
Routine cleaning and
basic cleaning of fine
stoneware tiles RM 753
Routine cleaning of tiles
in sanitary areas RM 751
Cleaning and disinfec-
tion in sanitary areas RM 732
Removal of coating
from all alkali-resistant
floors (e.g. PVC) RM 752
Removal of coating
from linoleum floors RM 754
Driving to the Place of Use
Establish mains contact
Cleaning method
Move the appliance back and forth.
Move the appliance from side to side
Cleaning
Polishing
Shutting Down the Appliance
Emptying the Fresh Water Res-
ervoir