Audiovox FR-314 - Manual (Page 13)

Selecting the Channel
To adjust the channel, press the function button once or until the
channel number flashes on the display. Pressing the up or down
buttons momentarily, within five seconds, will change the current
channel number. The LCD will indicate the current setting and, if
the beep conformation tones are activated, the transceiver will sound
a conformation tone. When the highest or lowest channel is reached,
a double tone will be played as the channel setting wraps to the
opposite limit of adjustment. The channel number will stop flashing
and the FR-314 will return to standby if no buttons are pressed for 5
seconds, or if the call or PTT buttons are pressed.
ÿ
Channel Display