Before startup, Attaching the accessories, Install wheels – Karcher K 5 Premium eco!ogic Home User Manual
Page 18: Install the storage for trigger gun, Install the transport handle, Install the dosage regulator for detergent, Install the high pressure hose drum

– 8
8 Dosage regulator for detergent
9 Storage for trigger gun
10 High-pressure hose drum
11 Transport handle
12 Hand crank for hose drum
13 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
14 Storage for spray lance
15 Storage hook for mains connection ca-
ble
16 Mains cable with mains plug
17 Plug 'n' Clean detergent bottle with
locking lid
18 Transport wheel with wheel cap
19 Trigger gun
20 Lock trigger gun
21 Key to detach the high pressure hose
from the trigger gun
22 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the hand spray gun
and turn the spray lance to the desired
position.
23 Spray lance with Dirtblaster
For strong contaminations
The Dirtblaster reaches its maximum
cleaning performance in standard
mode.
———————————————––––
Not included in the delivery
24 Water supply hose
Use a fabric reinforced water hose with
a commercially available coupling. Min-
imum diameter 13 mm (1/2 inch); mini-
mum length 7.5 m.
25 Water filter (order no. 4.730-059)
Illustrations on fold-out page!
Mount loose parts delivered with
appliance prior to start-up.
Illustration
Push the wheels into the intake and se-
cure them with the plugs. Align the plug
properly.
Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Insert the top holder and push down all
the way.
Illustration
Press in the storage hook and lock it
into the top position.
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
Slide the transport handle into the guide
and secure it with 2 screws.
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
Illustration
Slide the free end of the coiled high
Before Startup
Attaching the Accessories
Install wheels
Install the storage for trigger gun
Install the storage hook for the mains
connection cable
Install the transport handle
Install the dosage regulator for
detergent
Install the high pressure hose drum
18
EN