Storing the appliance, Frost protection, Maintenance and care – Karcher K 4 Premium eco!ogic Home User Manual
Page 22: Care, Maintenance, Troubleshooting, Appliance is not running, Appliance does not start, motor hums
– 12
Prior to extended storage periods, as dur-
ing the winter, also observe the instructions
in the Care section.
Park the machine on an even surface.
Press the disconnect on the trigger gun
and remove the high pressure hose
from the trigger gun.
Insert the trigger gun in its holder.
Engage the spray lance in its compart-
ment.
Illustration
Roll the high pressure hose on to the
hose drum: Pull out the hose drum han-
dle, turn it clockwise then retract the
handle.
Stow the power cord and the remaining
accessories on the appliance.
Notice
Appliances and accessories that are not
completely drained can be destroyed by
frost. Completely drain appliance and ac-
cessories and protect them against frost.
To avoid damage:
Detach the appliance from the water
supply.
Detach spray lance from the trigger
gun.
Switch the appliance on ("I/ON“), press
the trigger gun lever until no further wa-
ter is discharged (approx. 1 min).
Turn off the appliance.
Store the appliance and the entire ac-
cessories in a frost free room.
ƽ
Danger
Risk of electric shock. Turn off the appli-
ance and remove the mains plug prior to
performing any care and maintenance
work.
Prior to longer periods of storage, e.g. in
the winter:
Illustration
Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.
The appliance is maintenance free.
ƽ
Danger
Risk of electric shock. Turn off the appli-
ance and remove the mains plug prior to
performing any care and maintenance
work.
Repair work and work on the electrical
components may only be performed by an
authorised customer service.
You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
Pull on the lever of the trigger gun; the
device will switch on.
Check whether the voltage indicated on
the type plate corresponds to the volt-
age of the mains supply.
Check the mains connection cable for
damages.
Voltage reduction due to weak mains sup-
ply or when using an extension cable.
When switching on, first pull the lever of
the trigger gun and then switch the ap-
pliance switch to "I/ON".
Storing the Appliance
Frost protection
Maintenance and care
Care
Maintenance
Troubleshooting
Appliance is not running
Appliance does not start, motor
hums
22
EN