Karcher K 2 Premium - Manual (Page 13)

– 6
Caution
Safety devices protect the user and must not be
modified or bypassed.
The appliance switch prevents unintentional op-
eration of the appliance.
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appliance.
The overflow valve prevents the permissible
working pressure from being exceeded.
If the lever on the trigger gun is released the
pressure switch turns off the pump, the high-
pressure jet is stopped. If the lever is pulled the
pump is turned on again.
Caution
Create stability for the appliance prior to all work
on or with the appliance to prevent accidents or
damage.
The stability of the appliance is warranted when
it is placed onto an even surface.
These operating instructions describe the maxi-
mum equipment. Depending on the model, there
are differences in the scopes of delivery (see
packaging).
Illustrations on Page 2
1
High pressure connection
2 Appliance switch "0/OFF“/ „I/ON“
3 Storage hook for high pressure hose and
mains connection cable
4 Transport handle
5 Water connection with integrated sieve
6 Detergent suction hose with detergent filter
and lid
7 Detergent Tank
8 Coupling element for water connection
9 Storage for spray lance
10 Storage for trigger gun
11 Mains cable with mains plug
12 Bearing wheel
13 Trigger gun
14 Lock trigger gun
15 Clamp for high pressure hose
16 High pressure hose
Optional accessories
17 Spray lance with pressure regulation (Vario
Power)
18 Spray lance with Dirtblaster
19 Washing brush
20 Rotary washing brush
21 Foam nozzle with detergent container
Special accessories expand the possibilities of
using your appliance. Please contact your
KÄRCHER dealer for further information.
Mount loose parts delivered with appliance prior
to start-up.
Illustrations on Page 3
Illustration
 Insert the transport wheels and lock them.
Illustration
 Attach the transport handle.
Illustration
 Insert the detergent suction hose with filter
into the detergent tank and close it with the lid.
 Lock the detergent tank in place on the appli-
ance.
Illustration
 Screw the coupling element to the water
connection on the appliance.
Illustration
 Pull out the clamp for the high-pressure hose
from the hand spray gun (e.g. a Philips
screwdriver).
Illustration
 Connect high pressure hose to trigger gun.
 Push the clamp in until it locks. Check the se-
cure connection by pulling on the high-pres-
sure hose.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply with-
out a system separator. Use a suitable
system separator manufactured by KÄRCHER;
or, as an alternative, a system separator as per
EN 12729 Type BA. Water flowing through a sys-
tem separator is considered non-drinkable.
Caution
Always connect the system separator to the wa-
ter supply, never directly to the appliance!
Note: Impurities in the water can damage the
high-pressure pump and accessories. For pro-
tection, the use of the KÄRCHER water filter (op-
tional accessory, order no. 4.730-059) is
recommended.
Safety Devices
Power switch
Lock trigger gun
Overflow valve with pressure switch
Prerequisites for the appliance's
stability
Operation
Description of the Appliance
Special accessories
Before Startup
Water supply
13 EN