Karcher HD 9-50 Pe - Manual (Page 22)

– 8
 Screw off water supply hose and high
pressure hose.
 Blow through machine with com-
pressed air.
Note
Observe handling instructions of the anti-
freeze agent manufacturer.

Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
Caution
Risk of injury and damage! Observe the weight
of the appliance when you transport it.
 Push the push handle down and push
the appliance.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
 Connect the lifting device in the center
of the strut to load by crane.
ƽ
Danger
Risk of injury due to machine dropping.
– Check the strut for crane loading for dam-
age prior to each transport by crane.
– Only lift up the appliance by the strut when
loading by crane.
– Protect the lifting device from inadvertent
load release.
– Remove the spray pipe with hand spray
gun prior to transporting by crane.
– The appliance must only be transported by
properly trained crane personnel.
– Do stand stand below the load.
– Ensure that no persons are present in
the immediate vicinity of the crane.
– Do not leave the appliance on the crane
unattended.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
ƽ
Danger
Observe the safety notes in the engine op-
erating instructions prior to any care and
maintenance work.
ƽ
Danger
Risk of injury if the machine is left running in an
unattended state. Remove the spark plug be-
fore doing any work on the appliance.
Risk of burns! Do not touch hot silencers,
cylinders or radiator ribs.
Carry out maintenance tasks to the engine
according to the specifications provided in
the operating instructions of the engine
manufacturer.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract.
Please take advice on this matter.
 Check oil level of the engine.
 Check oil level from the oil level display
of the gears.
 Check oil level from the oil level display of
the high pressure pump.
Please contact Customer Service immedi-
ately if the oil is milky (water in oil).
 Check the high pressure hose for damages
(risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure hose.
 Check appliance (pump) for leaks.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
Drain water
Flush device with anti-freeze agent
Transport
Driving
Transport by crane
Storage
Maintenance and care
Maintenance
Safety inspection/ maintenance contract
Before each use
22 EN