Karcher B 140 R Bp Pack Dose 400Ah - Manual (Page 5)

QUICKSTART
5.964-043.0 03/12
Troubleshooting
1 A B C Appliance cannot be started
A
Insert battery plug.
B Safety switch not activated, sit down on the
seat. Set main switch to “1”
C Check battery; charge it if required.
2 A
D
B C Insufficient vacuum performance
A
Clean the seals between dirt water reservoir
and cover and check for tightness, replace if
required.
B Check the fluff filter, clean if required
C Clean the vacuum lips on the vacuum bar,
turn or replace if required.
D Check suction hose for blockages;
clean if required.
Check connection between suction hose and
suction bar and suction hose and wastewater
tank.
3 A Insufficient cleaning result
A
Check brush for wear and tear and clean it.
Check the brushes for wear (bristle length at
least 10 mm), replace if required.
4 A B C Insufficient water quantity
A
Check fresh water level, refill tank if
necessary.
B Check that the hose coupling for
draining the fresh water is connected.
C Clean the fresh water filter.
Open the ball tap.
5 A Brushes do not turn
A
Reduce contact pressure.
– Check the brushes for blockage due to
foreign particles, remove them if found.
– Motor overload, allow to cool down. Set the
key switch to "0". Wait approx. 10 minutes
before turning the key switch to "1" again.