Karcher BR 40-10 C Adv + MF - Manual (Page 15)

- 6
Specifications
1.783-329.0 1.783-328.0
Power
Nominal voltage
V/Hz 220...240 /
1~50
230 / 1~60
Average power consumption W 1900
Suction engine output W 500
Brush engine output W 2100
Max. power intake 2710
Maximum allowed net impedance Ohm 0.255+j0.159 0,256+j0,160
Type of protection IPX4
Extension cable 10 m mm 2 1,5
Extension cord 30 m mm 2 2,5
Vacuuming
Cleaning power, air quantity
l/s 20
Cleaning power, negative pressure kPa 10
Cleaning brushes
Working width
mm 400
Brush diameter mm 96
Brush speed 1/min 1100 1350
Dimensions and weights
Theoretical surface cleaning performance
m²/h 400
Fresh/dirt water reservoir volume l 10
Length (without pushing handle) mm 520
Width (without vacuum bar) mm 470
Height (without pushing handle) mm 380
Weight kg 44,5
Values determined as per EN 60335-2-67
Hand-arm vibration value
m/s 2 <2,5
Uncertainty K m/s 2 0,2
Sound pressure level L
pA
dB(A) 74
Uncertainty K
pA
dB(A) 1
Sound pressure level L
WA
dB(A) 87
Uncertainty K
WA
dB(A) 1
Accessories
Order No.
Piece Machine requires piece
Brush roller, red (medium, stand-
ard) For cleaning slightly dirtied or sensitive floors. 4.762-458.0 1 2
Brush roller, green (grit) For cleaning heavily dirtied floors. 4.762-252.0 1 2
Brush roller, orange (high/ low) For scrubbing structured floors (safety tiles, etc.). 4.762-251.0 1 2
Brush roller, white (soft) For polishing floors. 4.762-250.0 1 2
Pad roller shaft For intake of roller pads. 4.762-228.0 1 2
Pad, very soft, white For cleaning and polishing sensitive floorings. 6.369-727.0 1 2
Pad, soft, yellow For polishing floors. 6.369-724.0 1 2
Pad, medium soft, red For cleaning slightly dirtied floors. 6.369-726.0 1 2
Pad, hard, green For cleaning normal to heavily dirtied floors. 6.369-725.0 1 2
Microfibre roller To remove grey tint 4.114-004.0 1 2
Vacuum bar, standard 4.777-323.0 1 2
Vacuum bar, oil-resistant 4.777-322.0 1 2
Extension cable 20 m 6.647-022.0 1 1
Attachment kit transport wheels for BR 40/10 C Classic 2.783-013.0 1 1
15 EN