Karcher BDP 43-1500 C Bp - Manual (Page 14)

14 English
If the spray pressure becomes weaker,
move the pump handle up and down
several times.
Î Turn main key to "0" and remove the key.
Î Remove the cleaning product from the
prespray appliance (option) and rinse
nozzle using clear water.
Î Remove and empty the catch bin.
Î Pull the lever for level adjustment and
bring the handle in a vertical position.
Î Tilt the appliance rearward.
Î Remove the pad.
Î Tilt the appliance forward.
Î Clean the casing with a damp cloth.
Î Charge the battery if required.
Î Store the appliance in a dry room.
ƽ
Danger
Risk of injury! Before carrying out any tasks
on the machine, set the main key to "0" and
remove key and plug of the charger.
Î Check the mains connection cable for
damages. Replace the defective mains
cable.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
ƽ
Danger
Risk of injury! Before carrying out any tasks
on the machine, set the main key to "0" and
remove key and plug of the charger.
In case of faults that cannot be remedied us-
ing the table below please contact the cus-
tomer service. Shutting down
Maintenance and care
Maintenance contract
Faults
Fault Remedy
Appliance can-
not be started Check battery; charge it
if required.
Insufficient
cleaning result Check the pad for wear,
replace if required.
Pad does not
turn Check if foreign bodies
are blocking the pad; re-
move the foreign bodies
if required.
Accessories
Description Part no.:
Pad, soft, biege 6.371-081.0
Pad, medium soft, red 6.369-470.0
Pad, very soft, white 6.369-469.0
Pre-spraying unit 6.670-020.0