Karcher BDS 43-180 C - Manual (Page 11)

– 2
Safety devices serve to protect the user
and must not be rendered in operational or
their functions bypassed.
Prevents the appliance from being
switched on accidentally. To start the appli-
ance, first press the unlock button and then
the ON/OFF switch.
Prior to operation, the push rod must be in-
stalled as shown and the appliance has to
be connected to power.
Illustration on the inside of the front
cover
1 Actuator, disc brush / pad driver plate
2 Brush / pad driver plate with pad
3 Clamp for level adjustment
4 Switch ON / OFF
5 Handle
6 Unlocking button
7 Dosing lever for detergent solution (option)
8 Fuse for brush drive
9 Detergent tank (option)
10 Cable hook
11 Motor casing
12 Power cord
 The power cord must be checked regu-
larly for damages, such as cracks or ag-
ing. If damage is found, the cable must
be replaced before further use.
 Check appliance for damage, have
damages repaired by customer service.
– For connection values, see technical
data and type plate.
– The electrical connections must be
done by an electrician according to IEC
60364-1.
ƽ
Danger
Risk of electric shock.
– Do not drive over the mains cable.
ƽ
Danger
Risk of injury.
– Never wrap the mains cable around
your body or your neck.
– Do not let the mains cable come in contact
with the rotating brushes or rotating pads.
Safety Devices
Lock
Install the push rod
Device elements
Start up
Power connection
11 EN