Karcher BD 40-12 C Bp Pack User Manual
Quickstart, Start up, Operation
QUICKSTART
5.964-384.0 09/11
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.
Start up
1
A
b
A
Unplug the charger from the mains.
B
Wind the mains cable around the cable hold-
ers.
2
A
b
C
A
Open the cover of the fresh water reservoir.
B
Insert the filling hose into the fill opening and
connect the other end to a water faucet.
Fill in fresh water (maximum 50 °C).
Add detergent. Follow dosing instructions for
detergent.
C
Close the cover of the fresh water reservoir.
3
A
b
C
A
Pull the lever for level adjustment.
B
Adjust the handle to the desired height.
Release the lever for level adjustment.
C
Set the water quantity at the regulating valve
according to the dirt level and the type of
flooring.
Operation
1
A
GB
b
E
C
Starting the machine
A
Switch on the button for brush operations.
B
Switch on "Detergent" button.
C
Press the switch of the suction turbine; the
vacuum process will start.
Note
Depending on the cleaning task, individual func-
tions can remained switched off.
Activated switches light up.
D
Pull the lever of the vacuum bar lowering up
and then press it down; the vacuum bar is
lowered.
Caution
Risk of damage to the floor covering. Do not op-
erate the appliance on the spot.
Risk of damage. Raise the suction bar before
backing up for extended periods of time.
E
Operate the handle switch - the brush drive
and the detergent applicator are switched on
(if set up).
Move the appliance forward over the surface
to be cleaned.
BD 40/12 C