Karcher IVC 60-24-2 Tact - Manual (Page 13)

– 2
1 Power cord
2 Nameplate
3 Filter dedusting
4 Flat fold filter
5 Suction head
6 Handle of the suction head
7 Right unlocking of the placement me-
chanics
8 Intermediate ring
9 Steering roller of the dirt container
10 Stopper
11 Dirt receptacle
12 Left unlocking of the placement mechanics
13 Wheel
14 Suction head lock
15 Suction support
16 Steering roller of the chassis with park-
ing brake
17 Floor nozzle holder
18 Chassis
19 Drain pan
20 Handle of the dirt container
21 Holder for suction pipe
22 Connection plug of the thermal probe
23 ”Ready for use” indicator lamp
24 Rotating knob
25 Filter cover
26 Cable clamp
27 Push handle
28 Opening of the protective cover
29 Protective cover
30 Thermal probe
 Bring the appliance to working position
- secure it, if required, with parking
brakes.
 Insert the suction hose (not included)
into the suction hose connection.
 Check the fill level in the dirt container
prior to starting work and empty the
container if necessary.
 Ensure that the dirt container has been
inserted properly.
 Attach the desired accessoried (not in-
cluded).
Caution
The flat pleated filter must always be in
place while vacuuming.
Caution
Please note the following when switch-
ing from wet to dry vacuum cleaning:
If you vacuum dry dust while the filter ele-
ment is still wet the filter will become ob-
structed and may be damaged beyond
repair.

Dry the wet filter properly before use or
replace it with a dry one.
 Change the filter, if required, according
to instructions under the section "Main-
tenance and Care".
Note: The dirt container needs to be emp-
tied if it is full until about 3 cm below the up-
per rim.
– Check the fill level of the dirt container
at regular intervals, as the appliance
does not shut off automatically during
dry vacuuming.
Caution
Please observe the local provisions regard-
ing the wastewater treatment.
– Caution! If the appliance is used
while the dirt container is full, there
is a chance that the shut-off mecha-
nism will respond late and the appli-
ance might become overfilled.
– If wet dirt is vacuumed with the crevice
nozzle or if high volumes of liquid are
sucked up from a container, it is recom-
mended to deactivate the "Filter De-
dusting" function.
– If the maximum liquid level is reached
the appliance will turn off automatically.
– After the wet vacuuming: Clean the flat-
fold filter. Clean the thermal probe and
the protective cover with a moist cloth.
Clean the container with a damp rag
and dry it.
Device elements
Start up
Operation
Dry vacuum cleaning
Wet vacuum cleaning
13 EN