Karcher BRS 43-500 C - Manual (Page 15)

– 5
Caution
Risk of damage. Do not wash down the ap-
pliance with water and do not use aggres-
sive detergents.

Check electrical cable and plug for
damages. Get defective parts replaced
by Customer Service.
 Empty the detergent tank and rinse with
hot water (max. 50 °C).
 Fill a small amount of hot water into the
detergent tank.
 Reattach the detergent tank to the ap-
pliance.
 Flush the nozzle by pressing the deter-
gent button.
 Remove nozzle, rinse under running
water and insert in the nozzle holder on
the push handle.
 Empty detergent tank.
 Cleaning the sieve
 Remove the brushes and rinse with
warm water.
 Clean the brush tunnel.
 Reinstall the brushes and exchange
their positions to preserve them.
 Detach the coupling in the detergent
hose to prevent undesired water leaks
on the nozzle.
 Remove the waste container and clean it.
 Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
 Check the brushes for wear, replace if
required.
The brushes are considered worn, if the
bristles have the same length as the
yellow indicator bristles.
 Check appliance for damage, have
damages repaired by customer service.
 Check spray pattern of the nozzle.
Clean or replace the nozzles as need-
ed.
 Have the prescribed inspection carried
out by the customer service.
 Place the slider vertically and arrest.
 Tilt the appliance backward and store it
on the pushing handle.
 Press the brush change key toward the
outside and simultaneously tilt the
brush roller out.
 Pull out the brush roller.
 Place the new brush roller on the driver
and lock into place.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
Maintenance schedule
After the work
Weekly
Yearly
Maintenance Works
Replacing the brush rollers
Maintenance contract
15 EN