How to use the accessories – Karcher SC 5-800 C EU User Manual
Page 21

– 10
 It is recommended to sweep or vacuum the 
floor prior to using the steam cleaner. This 
way, the floor is already cleared of dirt/
loose particles prior to the wet cleaning.
Prior to treatment with the steam cleaner, 
always check the reaction of the textiles in 
an inconspicuous location: Steam at first, 
then let dry and then check for colour or 
shape changes.
When cleaning painted or plastic-coated 
surfaces, as found on kitchen and living 
room furniture, doors, parquet; wax, furni-
ture polish, plastic surfaces or paint can 
come loose or stains can be created. When 
cleaning these surfaces, briefly steam a 
cloth and wipe the surfaces with it.
Caution
Never direct the steam jet at glued edges 
as the edge band may loosen. Do not use 
the steam cleaner on unsealed wooden or 
parquet floors.
In case of low outside temperatures, espe-
cially in the winter, warm up the window 
pane by slightly steaming the entire glass 
surface. This will prevent tensions on the 
surface which might lead to glass break-
age.
Then clean the window surface with the 
hand nozzle and attachment. Use a squee-
gee to remove the water or wipe the surfac-
es dry. 
Caution
Do not direct steam onto the sealed loca-
tions of the window frame to prevent dam-
age.
You can use the steam gun without any ad-
ditional accessories, e.g.:
–
to remove odours and wrinkles from 
hanging clothes by steaming them at a 
distance of 10 to 20 cm.
–
to remove dust from plants. Here, keep 
a distance of 20-40 cm.
–
for moist dusting, by briefly steaming 
the cloth and wiping the furniture with it.
The closer this nozzle is to the contaminat-
ed area, the higher the cleaning effect, as 
the temperature and the steam are highest 
at the nozzle output. Especially suited for 
cleaning difficult access locations, joints, 
fittings, drains, sinks, toilets, blinds and 
heaters. Heavy lime scale can be drenched 
in vinegar prior to steam-cleaning. Let the 
vinegar penetrate for about 5 minutes.
The round brush can be installed onto the 
detail nozzle as an accessory. Attached 
brushes can therefore be used to remove 
heavy soiling.
Caution
Not suited for the cleaning of sensitive sur-
faces.
Illustration 
Attach the round brush to the detail nozzle.
How to Use the Accessories
Important application instructions
Cleaning floor surfaces
Refreshing textiles
Cleaning of Coated or Lacquered 
Surfaces
Cleaning of Glass
Steam gun
Detail nozzle
Round brush
21
EN
