Karcher FP 303 - Manual (Page 13)

– 7
ƽ
Risk of injury
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance works.
ṇ
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
 Remove and tap the polishing pads af-
ter every use. Wash and dry as needed.
Note: Can be washed at 60 °C; please
do not use any soft detergents, do not
dry in dryer.
 Place dry polishing pads into the stor-
age compartment.
Change the filter bag at regular intervals.

See Chapter "Inserting a filter bag".
Check the state of the polishing pads at
regular intervals; replace them if they are
worn out.

See Chapter "Insert the polishing
pads".
 This sound is caused by the system.
The appliance was not stored with the
transport lock activated. This sound will
disappear on its own after a while dur-
ing polishing.
Subject to technical modifications!
Maintenance and care
Cleaning the appliance and
accessories
Cleaning the polishing pads
Inserting a filter bag
Replacing polishing pads
Troubleshooting
Discs running unevenly / rattling
sound
Technical specifications
Voltage 230 V
Current type 1~50/
60 Hz
Protective class II
Connected load 600 W
Rotating speed, polish-
ing discs 1000 rpm
Weight 7 kg
Dimensions 385 x
340 x
1155 mm
Volume, filter bag 4 l
13 EN