beautypg.com

Operation, Description of the appliance, Preparing the appliance – Karcher BP 2 Cistern User Manual

Page 16

background image

– 3

For safety reasons, we rec-

ommend that you operate the

appliance only via a earth-

leakage circuit breaker (max.

30 mA).

The electrical connection of

the system may only be per-

formed by a qualified electri-

cian. Please follow the re-

spective national regulations!

This appliance is not intended

for use by persons with limit-

ed physical, sensory or men-

tal capacities or lacking expe-

rience and/or skills, unless

such persons are accompa-

nied and supervised by a per-

son in charge of their safety

or they have received precise

instructions on the use of this

appliance and have under-

stood the resulting risks.

Children may only use this

appliance if they are over the

age of 8 and supervised by a

person in charge of their safe-

ty, or if they have received in-

structions on the use of this

appliance and have under-

stood the resulting risks.

Children must not play with

this appliance.

Supervise children to prevent

them from playing with the

appliance.

Cleaning and user mainte-

nance must not be performed

by children without supervi-

sion.

1 Check valve (pre-assembled)
2 Handle
3 Power cord with plug
4 Connection G1 (33.3) internal

thread

5 Intake grille/ pre-filter
6 Float switch
7 Connection adapter for pumps G1
8 Hose connection pieces 1" and 3/4"
9 Hose clip
10 Holder float switch

Caution
Risk of injury or damage due to

toppling appliance.

Prior to every operation, place

the appliance on a level surface

and secure it against rolling

away.

Illustration
Connect garden hose or lifting tube:

When using a garden hose, screw
the connection adapter into the
connection piece.
Additional sealing is not required.

Screw a fitting hose connection
piece onto the connection adapter.

Attach the hose end to the hose
connection piece and secure it by
means of a hose clamp.
Tighten the hose clamp using a
ratchet (approx. 5 Nm).

Illustration

Push the holder for the float switch
into the handle bore until it locks in
place.

Operation

Description of the Appliance

Preparing the Appliance

16

EN