Airaid 400-941 - Manual

INSTALLATION INSTRUCTIONS
#400-941 Modular Intake Tube (MIT)
OR
#400-741 Airaid Jr. Kit
2004-05 Ford F-150 4.6L
(Does Not Fit Heritage Body)
Thank you for purchasing the Airaid Intake System. Please read the instruction manual carefully before
proceeding with the installation. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for
questions regarding fit or instructions. Your Airaid Intake System was carefully inspected and packaged.
Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid.
The air filter element is protected from direct exposure to water and debris; care should be taken not to drive
through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILTY! The air filter is reusable
and should be cleaned using the Airaid Filter Tune-Up Kit periodically.
Thank you for selecting Airaid.
Packing List:
KIT941T Modular Intake Tube 1
KITDCR02 Silicone Reducer 1
KITHUMPHS08 Silicone Hump Hose 1
KITHOSE02 5/8” x 20” Rubber hose 1
KIT941HP Hardware Pack 1
KIT131MOUNT Hose Mount 1
KIT09FWZ019 ¼” Flat Washer 1
Packing List (cont’d):
KITSMP19M4 #19 Speed Clamp 2
KITHS72 #72 Hose Clamp 2
KITHS56 #56 Hose Clamp 1
KITHS48 #48 Hose Clamp 1
Tools Required for this Installation:
Flat Head Screwdriver