Haltech Platinum PRO PLUG-IN Hyundai Genesis BK Theta (HT055045) User Manual
Page 6
4.
At this time you can connect optional accessories,sensors and solenoids via the rear
auxiliary connector, Refer to the rear auxiliary connector section for more information.
Figure 5 – Haltech optional Auxiliary Harness (#HT040003)
5.
Proceed to mount the Platinum Pro Plug-in ECU to the OEM mounting location on the
vehicle. The Mounting bracket has been designed to fit the existing mounting holes,
re-fit the 4 mounting bolts to secure.
Figure 6 – Haltech Pro Plug-in ECU installed
The
Haltech CAN Network
The Haltech CAN network allows for simple and effective expansion in ECU capability
and functionality without having to go to the trouble of wiring in a whole new computer.
Expansion is made possible by the addition of multiple expansion devices that
communicate to the main ECU via a Control Area Network (CAN).
Installation time and costs are kept to a minimum as all expansion devices are
powered up from the main ECU via the pre-terminated connection cable that comes
with each expansion device.
Simply connect the device directly to the 8 pin CAN connector on the rear of the ECU
or connect using an optional Haltech CAN Hub (order as part # HT059990) if multiple
expansion devices are required).
Each expansion device is pre-programmed with a unique ID code which allows it to
be recognised on the network and work correctly first time every time.
For current available expansion devices please go to our website at
Figure 15– Haltech ECU connected to a Racepak Dash
Figure 16 – Haltech ECU connected to 5 Auxiliary CAN based devices