Ferguson RCU650 - Manual (Page 5)

English
Note:
•
You can learn limited set of buttons on RCU650. Available buttons are shown on the
image.
• When you can not choose any more RCU650 buttons for learning, it means that remote
memory is full (RCU650 has limit for total 60 buttons).
• The learning mode is automatically terminated if no entry occurs during 14 seconds
period.
• Press TV button and Number 6 button can delete all codes you have learnt for all
devices.
Display device code
1. Press and hold the device button, simultaneously press button 1 to display the
thousands of the 4-figure code. Count how often the LED flashes, if the LED does not
flash, then the number is zero.
2. Press and hold the device button, simultaneously press button 2 to display the
hundreds of the 4-figure code.
3. Press and hold the device button, simultaneously press button 3 to display the tens of
the 4-figure code.
4. Press and hold the device button, simultaneously press button 4 to display the ones of
the 4-figure code.
For example for code 0169 for TV:
1. Press TV and 1 LED flashes Zero time
2. Press TV and 2 LED flashes One time
3. Press TV and 3 LED flashes Six times
4. Press TV and 4 LED flashes Nine times
Reset / Delete Function
Just simply press TV button and Button 0 together, when LED flashes three times, now all
settings will be deleted, and remote go back to factory default settings.