beautypg.com

Before you begin, 1 safety information – Ferguson Ariva HDplayer 200A User Manual

Page 6

background image

1. Before you begin

Thank you for purchasing the Ariva HDplayer 200A. This user manual provides step-by-step

instructions for installing and using your new HD media player. Ariva HDplayer 200A is a-
compact, highdefinition (HD) USB 2.0 media player that attaches to an entertainment unit

through a variety of audio/video interfaces and supports playback of major audio, video, and
image file formats. Player supports highdefinition video playback of up to 1080p through an

HDMI connection or standard definition for TVs with lower capabilities. High-fidelity digital
audio is supported from an optical interface. Two USB ports are available to connect USB

storage devices. The included remote control lets you quickly browse through your media
library and configure settings.

1.1 Safety Information

Please observe all warnings and instructions on the equipment and in these operating

instructions.

Please carefully read this user’s manual before using the device.

To avoid electric-shock hazards, do not open the cabinet, refer servicing to qualified

personnel only. If cabinet is opened warranty will be invalid.

Please switch off completely the device during thunder, during abnormal phenomenon,

before cleaning it and in case it remains out of service for a long period.

Do not expose the device under the sunlight. And keep it away from the heat source or

humid environments. Do not block ventilation holes of the device sothat air can circulate freely.

Please place the device in horizontal and stable conditions, keeping it away from vibrating.

If device is moved from warmer place to a colder one some problem might occur. Please

switch off the device and turn it on after 1 or 2 hours.

Keep the device away from flower vases, tubs, sinks, etc., in order to avoid damaging the

equipment. Do not touch power supply with wet hands.

Don’t put any objects on the device.

Be sure to turn the device off and disconnect the AC power cord before cleaning the receiver

surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak
soap/and/water solution and wrung out thoroughly, and then wipe again with a dry cloth.

 Do not connect cables while power is plugged.

Do not use damaged cables for connections: you could cause fires.

Please switch off completely the device while making all connections.

The product purchased is a sophisticated electronic device which is not suitable for children

under 18 years.

We do not assume responsibility for damages caused to people or object, deriving from use

of the device made by people under 18 years.

6